Q: It seems that there is no space for the extra 4 pins. Whats this about killing adapters motherboards?
Also, there are only 5 connectors for IDE drives and I have six, including the DVD drive. May cause a problem for a power adapter to a change in two?
Q: A friend and I try to make a DVD disk to a faulty CD ROM drive to install the replacement. After it is installed, we put the case back together and were ready to setup and turn on the computer to test it out. Shortly after reconnecting the power, and before we finshed everything is connected, the power supply blown. I still do not know why, I can only guess that it just due.
Unfortuanatly after installing a new diet, we found that the MB was fried. Now I would like to know if anyon
Q: The drive is a standard IDE DVD-RW. It is connected to the IDE channel on an Intel motherboard DP965LT, which is to express an i965.
Q: I have terrible problems with a DVD drive.
HDD on IDE and everything is fine . no DVD hooked up.
Then Put a DVD on the second IDE and I cannot get to Windows.
HDD and DVD on an IDE and I get into Windows, but nothing happens when I am in a CD . Well . it sits there, lights for a bit . then crashes, as Windows and comes back on. Everything appears fine in sys properties and man.
I DVD Firmware update, I swapped spots on cable, I changed master and slave.
Q: I try to build my first computer. It started the first time and I went to the bios to boot from a floppy to change to CD-ROM. Ive rebooted with Windows XP in the DVD drive and it started loading. However, it is halted and gave me a message that charging is stopped to prevent “damage to the computer, something like that, I do not remember exactly what she said. I system was started again and the mail message was “System failed due to overclocking. I turned it off and again
but now will no